Standing Seam – 1″ Flush Panel with Reveal
-
Flush panel system designed for use in soffit, mansard, and wall applications
-
15-inch-wide flush panel system provides a smooth, flat surface to complement any architectural metal roofing system
1″ Interlocking Flush Panel; max width 15.5″; concealed, interlocking
seams fastened with (2) #10-12 x 1″ long No. 2 Phillips drive pancake
head, wood screws; fastening metal to panel to Wood or Steel
Substrate; maximum 12″ fastener spacing; Panel Rollformer: Schlebach
Quadro-Plus Rollformer; Oil Canning is a characteristic of light gauge architectural metals and is not a flaw and therefore is not a cause for
rejection.
Specifications
Design Information
• Vertical or Horizontal Application
• Actual Panel Width: 14″ from 20″ Coil
• Solid Substrate or Open Framing
• Architectural Soffit/Wall Panel w/Reveal
• Concealed Fastener Attachment – No Clip Required
• 24 and 26 Gauge Galvalume®
• .032″ Aluminum
• 16oz Copper
• 30Year Finish Warranty on Kynar 500 Finish
• WeatherTight Warranty Not Available
• Underlayment Not Required
• Vented or Non-Vented
Test Report Summary
• No Testing Performed